Alamo none User Manual Page 84

  • Download
  • Add to my manuals
  • Print
  • Page
    / 150
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 83
ASSEMBLY
GRASS KING 03/09 Assembly Section 3-2
© 2009 Alamo Group Inc.
ASSEMBLY
The GRASS KING will attach to most tractors with Cat I or Cat II Hitch and 540 PTO RPM.
TRACTOR PREPARATION
For satisfactory operation the Grass King machine should be attached to tractors that are of sufficient size and
horse power. The Grass King flail mower requires a minimum 40 horse power and a minimum base tractor
weight of 4500 pounds. The Grass King rotary mower requires a minimum 50 horse power and a minimum
base tractor weight of 6000 pounds.
In addition, the left rear tire should have a full charge of liquid ballast. The rotary Grass King requires that the
rear tractor tires be spread to a minimum 96 inches outside dimension.
Note: When attaching the rotary Grass King head to the tractor, it may be necessary to move the main frame
further to the right if the head hits the tire when the head is tilted up. This is done by loosening the bolts that
attach the hitch weldment to the mainframe weldment and sliding the frame to the right. It may be necessary to
loosen the pump suction line and readjust in order to prevent the hose from kinking when adjusting the frame.
In order to move the frame the maximum amount to the right, the hitch weldment attachment bolts on the right
hand side will have to be completely removed so that the hitch can be positioned on the left side of the cylinder
lug. (See A-frame illustration in the parts section).
DEALER SETUP INSTRUCTIONS
Assembly of this mower is the responsibility of the Alamo dealer. The mower should be delivered to the owner
completely assembled, lubricated, and adjusted for normal cutting conditions.
Set up mower as received from the factory with these instructions. Open parts box and lay parts out to make
location easy. Refer to the parts lists and exploded view drawings for more detail.
This mower is shipped partially assembled. Assembly will be easier if components are aligned and loosely
assembled before tightening hardware.
Always use personal protection devices such as eye, ear and foot protectors during
assembly.
Page view 83
1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 149 150

Comments to this Manuals

No comments