Alamo none User Manual Page 140

  • Download
  • Add to my manuals
  • Print
  • Page
    / 150
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 139
MAINTENANCE
GRASS KING 03/09 Maintenance Section 5-12
© 2009 Alamo Group Inc.
MAINTENANCE
POSSIBLE TROUBLE
POSSIBLE TROUBLE CAUSES REMEDIES
1. Motor turns while unloaded
but slows down or stops when
load is applied.
A. Scored back plate.
B. Scored or worn piston shoes.
C. Low relief valve pressure.
A. Remove backplate and
examine surface condition of flat
area; if scored, replace
backplate. DO NOT LAP.
B. Disassemble motor, examine
condition of shoes on pistons;
replace pistons as a complete
set if necessary. DO NOT LAP.
C. Check relief valve for proper
pressure setting adjust or
replace relief valve.
2. Motor will not turn. A. Severely scored backplate. A. Disassemble motor
completely. Inspect all parts,
clean all parts, replace all worn
parts and flush hydraulic system.
3. Motor free wheels. A. Oil-flow and pressure shut off
going to motor.
A. When the hydraulic system is
shut off, either by shutting off the
engine on a closed loop system
or returning the control valve
spool to neutral on an open
center system, the motor will
free-wheel after it has leaked off.
This is inherent in the design. On
a closed loop or propulsion
system, the motor will not
free-wheel as long as charge
pressure is maintained to and
from the motor.
4. Excessive case drain flow. A. Excessive internal wear in
motor.
A. Disassemble motor, inspect
parts and replace as necessary.
Case drain flow should not
exceed 1.5 GPM at full pressure.
Page view 139
1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 149 150

Comments to this Manuals

No comments