©2009 Alamo Group Inc.$0.00Published 03/09 Part No. 803213COPERATOR’S MANUAL ALAMO INDUSTRIAL® 1502 E. WalnutSeguin, Texas 78155830-372-3551E
SAFETYINTERSTATER 03/09 Safety Section 1-2© 2009 Alamo Group Inc.SAFETYGeneral Safety Instructions and PracticesOperator Safety Instructions and Pra
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-16© 2009 Alamo Group Inc.ASSEMBLYAttach the return hose to the return filter on the hydraulic tank. AS
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-17© 2009 Alamo Group Inc.ASSEMBLYAttach suction hose (Item 1) ASM-FL-0041 from auxiliary pump to hydrau
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-18© 2009 Alamo Group Inc.ASSEMBLYITEM PART NO. QTY DESCRIPTION8* 001775 1 Hose - Control Valve to Pump7
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-19© 2009 Alamo Group Inc.ASSEMBLYCONTROL CABLE CONNECTION TO CONTROL STICK ASSEMBLIESFirst remove the C
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-20© 2009 Alamo Group Inc.ASSEMBLYINITIAL START-UP PROCEDURE1. Check all nuts and hex head capscrews to
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-21© 2009 Alamo Group Inc.ASSEMBLYFilter buggies or carts are commerciallyavailable for hydraulic system
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-22© 2009 Alamo Group Inc.ASSEMBLYINSTALLATION OF REAR MOWERBefore attaching mower to tractor, it will b
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-23© 2009 Alamo Group Inc.ASSEMBLYWith the cutterhousing tipped up, attach housingshoes/wearplate. Carri
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-24© 2009 Alamo Group Inc.ASSEMBLY1. Attach outboard bearing plate to cutterhousing.FORWARD ROTATION (B
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-25© 2009 Alamo Group Inc.ASSEMBLYInstall idler arm assembly to bearing plate. Do notsecure at this tim
SAFETYINTERSTATER 03/09 Safety Section 1-3© 2009 Alamo Group Inc.SAFETYThe rotating parts of this machine continue to rotate even after the PTO has
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-26© 2009 Alamo Group Inc.ASSEMBLY1. Properly mount rear mower to tractor and installdriveline. See INST
Operation Section 4-1© 2009 Alamo Group Inc.OPERATION SECTION
OPERATIONINTERSTATER 03/09 Operation Section 4-2© 2009 Alamo Group Inc.OPERATIONALAMO INDUSTRIAL INTERSTATER OPERATING INSTRUCTIONSAlamo Industrial
OPERATIONINTERSTATER 03/09 Operation Section 4-3© 2009 Alamo Group Inc.OPERATION1. Standard Equipment and SpecificationsBase Unit Specifications16’5
OPERATIONINTERSTATER 03/09 Operation Section 4-4© 2009 Alamo Group Inc.OPERATION2.OPERATOR REQUIREMENTSSafe operation of the unit is the responsibil
OPERATIONINTERSTATER 03/09 Operation Section 4-5© 2009 Alamo Group Inc.OPERATION3. TRACTOR REQUIREMENTSIn addition to tractor horsepower and size re
OPERATIONINTERSTATER 03/09 Operation Section 4-6© 2009 Alamo Group Inc.OPERATIONDO NOT use a PTO adapter to attach a non-matching Implement drivelin
OPERATIONINTERSTATER 03/09 Operation Section 4-7© 2009 Alamo Group Inc.OPERATIONNever allow children or other persons to ride on the Tractor or Impl
OPERATIONINTERSTATER 03/09 Operation Section 4-8© 2009 Alamo Group Inc.OPERATION5. STARTING THE TRACTORThe operator must have a complete understandi
OPERATIONINTERSTATER 03/09 Operation Section 4-9© 2009 Alamo Group Inc.OPERATION6.1 Connecting the Mower A-Frame to the Tractor1. Make sure the trac
SAFETYINTERSTATER 03/09 Safety Section 1-4© 2009 Alamo Group Inc.SAFETYAlways read carefully and comply fully with the manufacturer’sinstructions wh
OPERATIONINTERSTATER 03/09 Operation Section 4-10© 2009 Alamo Group Inc.OPERATION7. SETTING THE MOWER Properly setting the cutting height is essenti
OPERATIONINTERSTATER 03/09 Operation Section 4-11© 2009 Alamo Group Inc.OPERATION7.1 Roller Height Adjustment1. The mower’s cutting height is set by
OPERATIONINTERSTATER 03/09 Operation Section 4-12© 2009 Alamo Group Inc.OPERATION7.2 Leveling DeckTo Facilitate a safe and efficient mowing operatio
OPERATIONINTERSTATER 03/09 Operation Section 4-13© 2009 Alamo Group Inc.OPERATIONWhen fitting the mower to the tractor, the telescoping driveline mu
OPERATIONINTERSTATER 03/09 Operation Section 4-14© 2009 Alamo Group Inc.OPERATIONShorten the driveline profiles as follows:• Remove the driveline fr
OPERATIONINTERSTATER 03/09 Operation Section 4-15© 2009 Alamo Group Inc.OPERATIONDO NOT allow any person under a folded wing unless wing is securely
OPERATIONINTERSTATER 03/09 Operation Section 4-16© 2009 Alamo Group Inc.OPERATION9.2 Mower Pre-Operation Inspection/ServiceBefore each mower use, a
OPERATIONINTERSTATER 03/09 Operation Section 4-17© 2009 Alamo Group Inc.OPERATION•Check that the main driveline securelyattached to the tractor and
OPERATIONINTERSTATER 03/09 Operation Section 4-18© 2009 Alamo Group Inc.OPERATION• Inspect oil level in gearbox and replenish ifneeded. A low oil le
OPERATIONINTERSTATER 03/09 Operation Section 4-19© 2009 Alamo Group Inc.OPERATION9.3 Cutting Component InspectionInspect blade pan and blade assembl
SAFETYINTERSTATER 03/09 Safety Section 1-5© 2009 Alamo Group Inc.SAFETYEquipment Operation Safety Instructions and PracticesNever leave the Tractor
OPERATIONINTERSTATER 03/09 Operation Section 4-20© 2009 Alamo Group Inc.OPERATION9.4 Blade Bolt InspectionInspect Blade Bolt Head daily for wear as
OPERATIONINTERSTATER 03/09 Operation Section 4-21© 2009 Alamo Group Inc.OPERATIONFlail Mower PRE-OPERATION InspectionMower ID#________________ Make
OPERATIONINTERSTATER 03/09 Operation Section 4-22© 2009 Alamo Group Inc.OPERATIONTractor PRE-OPERATION InspectionMower ID#________________ Make ____
OPERATIONINTERSTATER 03/09 Operation Section 4-23© 2009 Alamo Group Inc.OPERATION10. DRIVING THE TRACTOR AND IMPLEMENTSafe tractor transport require
OPERATIONINTERSTATER 03/09 Operation Section 4-24© 2009 Alamo Group Inc.OPERATION10.1 Starting the TractorThe procedure to start the tractor is mode
OPERATIONINTERSTATER 03/09 Operation Section 4-25© 2009 Alamo Group Inc.OPERATION10.3 Operating the Mower WingsTransport Position1. With tractor eng
OPERATIONINTERSTATER 03/09 Operation Section 4-26© 2009 Alamo Group Inc.OPERATIONOperating PositionEnsure that ON/OFF switch(es) is (are) in "O
OPERATIONINTERSTATER 03/09 Operation Section 4-27© 2009 Alamo Group Inc.OPERATION10.4 Driving the Tractor and ImplementsStart off driving at a slow
OPERATIONINTERSTATER 03/09 Operation Section 4-28© 2009 Alamo Group Inc.OPERATION10.5 Crossing Ditches and Steep InclinesWhen crossing ditches with
OPERATIONINTERSTATER 03/09 Operation Section 4-29© 2009 Alamo Group Inc.OPERATIONInclines and ditches should be approached along aline which is at a
SAFETYINTERSTATER 03/09 Safety Section 1-6© 2009 Alamo Group Inc.SAFETYFlail Mowers are capable under adverse conditions of throwingobjectsfor great
OPERATIONINTERSTATER 03/09 Operation Section 4-30© 2009 Alamo Group Inc.OPERATIONMany varied objects, such as wire, cable, rope, or chains, can beco
OPERATIONINTERSTATER 03/09 Operation Section 4-31© 2009 Alamo Group Inc.OPERATIONFlail Mowers are capable under adverse conditions of throwingobject
OPERATIONINTERSTATER 03/09 Operation Section 4-32© 2009 Alamo Group Inc.OPERATION11.4 PTO RPM and Ground SpeedGround speed for mowing will depend up
OPERATIONINTERSTATER 03/09 Operation Section 4-33© 2009 Alamo Group Inc.OPERATIONDo not mow with two machines in the same area except with Cab tract
OPERATIONINTERSTATER 03/09 Operation Section 4-34© 2009 Alamo Group Inc.OPERATION11.6 Shutting Down the ImplementTo shut down the implement, first b
OPERATIONINTERSTATER 03/09 Operation Section 4-35© 2009 Alamo Group Inc.OPERATIONAfter disconnecting the 3 lift points, remove themower driveline fr
OPERATIONINTERSTATER 03/09 Operation Section 4-36© 2009 Alamo Group Inc.OPERATIONMOWER STORAGEIt is recommended that the mower be stored with the ce
OPERATIONINTERSTATER 03/09 Operation Section 4-37© 2009 Alamo Group Inc.OPERATIONBefore transporting the tractor and mower, idle thetractor engine,
OPERATIONINTERSTATER 03/09 Operation Section 4-38© 2009 Alamo Group Inc.OPERATIONIf the tractor’s hydraulic pump is not independent of the tractor P
OPERATIONINTERSTATER 03/09 Operation Section 4-39© 2009 Alamo Group Inc.OPERATIONMake certain that the “Slow Moving Vehicle” (SMV) sign is installed
SAFETYINTERSTATER 03/09 Safety Section 1-7© 2009 Alamo Group Inc.SAFETYDo not mount or dismount the Tractor while the tractor is moving. Mountthe Tr
OPERATIONINTERSTATER 03/09 Operation Section 4-40© 2009 Alamo Group Inc.OPERATIONReduce speed before turning or applying the brakes.Ensure that both
OPERATIONINTERSTATER 03/09 Operation Section 4-41© 2009 Alamo Group Inc.OPERATIONArrange the chains so that when tightened, thechains are pulling do
OPERATIONINTERSTATER 03/09 Operation Section 4-42© 2009 Alamo Group Inc.OPERATION14. TROUBLE SHOOTING GUIDEProblem Possible Cause RemedyExcessive Vi
OPERATIONINTERSTATER 03/09 Operation Section 4-43© 2009 Alamo Group Inc.OPERATIONKnives Wear Too Fast Cutting in sandy conditions. Increase cutting
Maintenance Section 5-1© 2009 Alamo Group Inc.MAINTENANCE SECTION
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-2© 2009 Alamo Group Inc.MAINTENANCE DAILY CHECKSBefore operating your Interstater, take the ti
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-3© 2009 Alamo Group Inc.MAINTENANCEA LIFT FRAME POVOT PIN G REAR MOWER IDLER ARMB WING MOWER
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-4© 2009 Alamo Group Inc.MAINTENANCEADJUSTING TENSION OF DRIVEBELTS1. Remove Pump Cover.2. Loosen
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-5© 2009 Alamo Group Inc.MAINTENANCE5. Remove filter. Inspect material trapped by the filter. It
SAFETYINTERSTATER 03/09 Safety Section 1-8© 2009 Alamo Group Inc.SAFETYDo Not operate this equipment in areas where insects such as bees may attack
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-6© 2009 Alamo Group Inc.MAINTENANCECUTTER UNITA. GENERALThe INTERSTATER electrical circuit contro
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-7© 2009 Alamo Group Inc.MAINTENANCEREPLACING CUTTER UNIT DRIVEBELTSNOTE: Belts must be replaced a
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-8© 2009 Alamo Group Inc.MAINTENANCEROLLER BEARING REPLACEMENTSecurely support mower while removin
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-9© 2009 Alamo Group Inc.MAINTENANCECUTTERSHAFT BEARING REPLACEMENTOutboard Bearing1. Lift cutter
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-10© 2009 Alamo Group Inc.MAINTENANCEInboard (Drive) Bearing1. Remove spring from idler arm. Fig.
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-11© 2009 Alamo Group Inc.MAINTENANCECHANGING TO FORWARD OR REVERSE ROTATIONWing MowersThe hydraul
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-12© 2009 Alamo Group Inc.MAINTENANCEHYDRAULICSGeneralThe INTERSTATER hydraulic system consists of
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-13© 2009 Alamo Group Inc.MAINTENANCETroubleshootingThe following shows various problems, the appa
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-14© 2009 Alamo Group Inc.MAINTENANCEPOWER CIRCUITThe pump unit assembly is made up of the oil
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-15© 2009 Alamo Group Inc.MAINTENANCEReservoirThe reservoir stores hydraulic system oil. The br
SAFETYINTERSTATER 03/09 Safety Section 1-9© 2009 Alamo Group Inc.SAFETYAvoid mowing in reverse direction when possible. Check to make sure there a
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-16© 2009 Alamo Group Inc.MAINTENANCEChecking Solenoid Valve1. With engine running, turn the mower
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-17© 2009 Alamo Group Inc.MAINTENANCEInspection of Hydraulic Pump1. Inspect flat surface of the ba
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-18© 2009 Alamo Group Inc.MAINTENANCEPOSSIBLE TROUBLE CAUSES REMEDIESSystem will not operate in Oi
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-19© 2009 Alamo Group Inc.MAINTENANCEHydraulic Motor Disassembly1. Clean outside of unit thoroughl
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-20© 2009 Alamo Group Inc.MAINTENANCEInspection1. Wash all parts thoroughly in a suitable solvent.
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-21© 2009 Alamo Group Inc.MAINTENANCETroubleshootingPOSSIBLE TROUBLE CAUSES REMEDIESMotor turns wh
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-22© 2009 Alamo Group Inc.MAINTENANCECONTROL CIRCUITLift and Tilt CylindersHydraulic cylinders cha
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-23© 2009 Alamo Group Inc.MAINTENANCEHydraulic Gear PumpThe gear pump, mounted to the pump mount a
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-24© 2009 Alamo Group Inc.MAINTENANCEChecking Relief Valve Pressure1. To check the relief valve pr
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-25© 2009 Alamo Group Inc.MAINTENANCEExternal Coil Slip Disk ReplacementA. TO DISASSEMBLE EXTERNAL
SAFETYINTERSTATER 03/09 Safety Section 1-10© 2009 Alamo Group Inc.SAFETYConnecting or Disconnecting Implement Safety Instructions and PracticesDO NO
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-26© 2009 Alamo Group Inc.MAINTENANCESlip ClutchA slip clutch is incorporated in the PTO driveline
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-27© 2009 Alamo Group Inc.MAINTENANCESEASONAL CLUTCH MAINTENANCEIt is important that the clutch li
MAINTENANCEINTERSTATER 03/09 Maintenance Section 5-28© 2009 Alamo Group Inc.MAINTENANCEProper Torque for FastenersThe chart lists the correct tighte
ALAMO-INDUSTRIAL LIMITED WARRANTY1. LIMITED WARRANTIES1.01. Alamo Industrial warrants for one year from the purchase date to the original non-commer
To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions andthe Safety Messages in this Manual.
INTERSTATER - SOM 03/09Printed in USA P/N 803213C
SAFETYINTERSTATER 03/09 Safety Section 1-11© 2009 Alamo Group Inc.SAFETYTransporting Safety Instructions and PracticesOn a fully-assembled unit, do
To the Owner/Operator/DealerAll implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator w
SAFETYINTERSTATER 03/09 Safety Section 1-12© 2009 Alamo Group Inc.SAFETYTransport only at speeds where you can maintain control of theequipment. Ser
SAFETYINTERSTATER 03/09 Safety Section 1-13© 2009 Alamo Group Inc.SAFETYMaintenance and Service Safety Instructions and PracticesMake sure the PTO s
SAFETYINTERSTATER 03/09 Safety Section 1-14© 2009 Alamo Group Inc.SAFETYPeriodically inspect all moving parts for wear and replace whennecessary wit
SAFETYINTERSTATER 03/09 Safety Section 1-15© 2009 Alamo Group Inc.SAFETYConcluding Safety Instructions and PracticesAlways disconnect the main PTO D
SAFETYINTERSTATER 03/09 Safety Section 1-16© 2009 Alamo Group Inc.SAFETYDecal LocationNOTE: Alamo Industrial supplies safety decals on this product
SAFETYINTERSTATER 03/09 Safety Section 1-17© 2009 Alamo Group Inc.SAFETYITEM PART NO. QTY LEVEL DESCRIPTION1. 002369 4 DANGER Multiple-Hazard2. 0024
SAFETYINTERSTATER 03/09 Safety Section 1-18© 2009 Alamo Group Inc.SAFETYDecal DescriptionDanger! Mult-Hazard Warning. Failing to followthese Safety
SAFETYINTERSTATER 03/09 Safety Section 1-19© 2009 Alamo Group Inc.SAFETYDANGER! Keep Away! If front deflector shield isremoved from flail housing,
SAFETYINTERSTATER 03/09 Safety Section 1-20© 2009 Alamo Group Inc.SAFETYWARNING! Keep all safety shielding installed,repaired and replaced when dam
SAFETYINTERSTATER 03/09 Safety Section 1-21© 2009 Alamo Group Inc.SAFETYWARNING! Do not operate with Belt Shieldremoved. Finger(s) may be pinched of
Table of ContentsSAFETY SECTION ... 1-1Gene
SAFETYINTERSTATER 03/09 Safety Section 1-22© 2009 Alamo Group Inc.SAFETYADVERTENCIA! Tanque Sobrepresion. Slowlyopen cap to relieve pressure befor
SAFETYINTERSTATER 03/09 Safety Section 1-23© 2009 Alamo Group Inc.SAFETYINFORMATION - Attention - Service HydraulicSystem with Universal Tractor Hyd
SAFETYINTERSTATER 03/09 Safety Section 1-24© 2009 Alamo Group Inc.SAFETYInstructions to properly lubricate and check mowerfor potential problems pri
SAFETYINTERSTATER 03/09 Safety Section 1-25© 2009 Alamo Group Inc.SAFETYINFORMATION - Pull to Start, Push to Stop02962748INFORMATION - To prevent pr
SAFETYINTERSTATER 03/09 Safety Section 1-26© 2009 Alamo Group Inc.SAFETYALAMO INDUSTRIAL LOGOP/N 001651NAME LOGO - Alamo IndustrialP/N 02960766INTER
SAFETYINTERSTATER 03/09 Safety Section 1-27© 2009 Alamo Group Inc.SAFETYFederal Laws and RegulationsThis section is intended to explain in broad ter
Cutting Component Inspection ...
SEASONAL CLUTCH MAINTENANCE ... 5-27Proper Tor
In order to reduce accidents and enhance the safe operation of mowers, Alamo Industrial, in cooperationwith other industry manufacturers has developed
Alamo Industrial Division is willing to provideone (1) AEM Mower Safety Practices VideoPlease Send Me: VHS Format – AEM/FEMA Mower Operator Safety Vid
Introduction Section 2-1© 2009 Alamo Group Inc.INTRODUCTION SECTION
INTRODUCTIONINTERSTATER 03/09 Introduction Section 2-2© 2009 Alamo Group Inc.INTRODUCTIONThis Flail Mower is designed with care and built with quali
INTRODUCTIONINTERSTATER 03/09 Introduction Section 2-3© 2009 Alamo Group Inc.INTRODUCTIONThe Interstater is a revolutionary mowing system. Utilizing
INTRODUCTIONINTERSTATER 03/09 Introduction Section 2-4© 2009 Alamo Group Inc.INTRODUCTIONAttention Owner/OperatorBEFORE OPERATING THIS MACHINE:1. C
Assembly Section 3-1© 2009 Alamo Group Inc.ASSEMBLY SECTION
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-2© 2009 Alamo Group Inc.ASSEMBLYGENERAL INSTRUCTIONSTo assemble your new INTERSTATER and mount it to yo
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-3© 2009 Alamo Group Inc.ASSEMBLYPRELIMINARY TRACTOR PREPARATIONDepending on the make and model of tract
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-4© 2009 Alamo Group Inc.ASSEMBLYDRIVE COUPLING ATTACHMENTAssemble the front coupling to the enginecrank
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-5© 2009 Alamo Group Inc.ASSEMBLY5. Lift the rear of the frame and secure with (4) 1/2" x 1 1/2&quo
Safety Section 1-1© 2009 Alamo Group Inc.SAFETY SECTION
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-6© 2009 Alamo Group Inc.ASSEMBLYRaise the left lift frame with the hydraulic jack and align frame with
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-7© 2009 Alamo Group Inc.ASSEMBLY If it is necessary to loosen the nut on the pivot pin. Re-torque the n
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-8© 2009 Alamo Group Inc.ASSEMBLYAttach the hydraulic pump assemblies to the pump mount plate with (2) 1
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-9© 2009 Alamo Group Inc.ASSEMBLYUsing the wire identified as “Ignition-Start” leading from ignition swi
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-10© 2009 Alamo Group Inc.ASSEMBLY
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-11© 2009 Alamo Group Inc.ASSEMBLYCONTROL VALVEAttach valve stand to the top of the right lift cylinder
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-12© 2009 Alamo Group Inc.ASSEMBLYHYDRAULICSRefer the Tractor Manual when connecting hydraulic hoses to
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-13© 2009 Alamo Group Inc.ASSEMBLY1. Attach the two Pump Case Drain hoses p/n001788 (Item 1 and 2) from
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-14© 2009 Alamo Group Inc.ASSEMBLY6. Attach the Return Hose (Item 1) to Left Wing ASM-FL-0032 & 003
ASSEMBLYINTERSTATER 03/09 Assembly Section 3-15© 2009 Alamo Group Inc.ASSEMBLYSlide the left wing pressure hose (Item 1) through the protective slee
Comments to this Manuals