Alamo EAGLE 10/15 User Manual

©2009 Alamo Group Inc.EAGLE 10/15Published 03/09 Part NO. 00780567COPERATOR’S MANUAL ALAMO INDUSTRIAL 1502 East WalnutSeguin, Texas 781558

SAFETYEAGLE 15 03/09 Safety Section 1-4©2009 Alamo Group Inc.SAFETYPROLONGED EXPOSURE TO LOUD NOISE MAY CAUSEPERMANENT HEARING LOSS! Tractors with

OPERATIONEAGLE 15 03/09 Operation Section 4-6©2009 Alamo Group Inc.OPERATIONThe horsepower required to operate the mower depends on several operatin

OPERATIONEAGLE 15 03/09 Operation Section 4-7©2009 Alamo Group Inc.OPERATION3.5 Front End WeightA minimum of 20% total tractor weight must be mainta

OPERATIONEAGLE 15 03/09 Operation Section 4-8©2009 Alamo Group Inc.OPERATION3.7 Tire SpacingTractor tires should be set a minimum of 60”(1.5mm) apar

OPERATIONEAGLE 15 03/09 Operation Section 4-9©2009 Alamo Group Inc.OPERATIONNever allow children or other persons to ride on the Tractor or Implemen

OPERATIONEAGLE 15 03/09 Operation Section 4-10©2009 Alamo Group Inc.OPERATION5. STARTING THE TRACTORThe operator must have a complete understanding

OPERATIONEAGLE 15 03/09 Operation Section 4-11©2009 Alamo Group Inc.OPERATION6.1 Connecting the Mower Tongue to the Tractor1. Ensure the tractor is

OPERATIONEAGLE 15 03/09 Operation Section 4-12©2009 Alamo Group Inc.OPERATION6.3 Connecting Mower Hydraulic Lines to the TractorWith the tractor shu

OPERATIONEAGLE 15 03/09 Operation Section 4-13©2009 Alamo Group Inc.OPERATIONHydraulic Cylinder PrimingHydraulic Cylinders must be filled with hydra

OPERATIONEAGLE 15 03/09 Operation Section 4-14©2009 Alamo Group Inc.OPERATION5. IMPORTANT: Alternate adjustments between rods and adjust at equal l

OPERATIONEAGLE 15 03/09 Operation Section 4-15©2009 Alamo Group Inc.OPERATION8.1 Driveline Length Check When fitting the mower to the tractor, the t

SAFETYEAGLE 15 03/09 Safety Section 1-5©2009 Alamo Group Inc.SAFETYUse extreme caution when getting onto the Implement to perform repairs, maintenan

OPERATIONEAGLE 15 03/09 Operation Section 4-16©2009 Alamo Group Inc.OPERATION“Bottoming Out” Check Procedure• Disconnect driveline from the tractor

OPERATIONEAGLE 15 03/09 Operation Section 4-17©2009 Alamo Group Inc.OPERATION8.2 Constant Velocity (CV) DrivelineFor mowers equipped with a Constant

OPERATIONEAGLE 15 03/09 Operation Section 4-18©2009 Alamo Group Inc.OPERATIONDo not turn so sharp or lift mower so high to produce a severe "kn

OPERATIONEAGLE 15 03/09 Operation Section 4-19©2009 Alamo Group Inc.OPERATION9.1 Tractor Pre-Operation Inspection/ServiceRefer to the tractor operat

OPERATIONEAGLE 15 03/09 Operation Section 4-20©2009 Alamo Group Inc.OPERATIONThe operator’s manual and safety signs affixed onthe unit contain impor

OPERATIONEAGLE 15 03/09 Operation Section 4-21©2009 Alamo Group Inc.OPERATION• Ensure the tractor PTO master shield is in place, lowered and in good

OPERATIONEAGLE 15 03/09 Operation Section 4-22©2009 Alamo Group Inc.OPERATION• Ensure each hydraulic cylinder is installed and retained correctly.

OPERATIONEAGLE 15 03/09 Operation Section 4-23©2009 Alamo Group Inc.OPERATION9.3 Cutting Component InspectionInspect blade pan and blade assembly f

OPERATIONEAGLE 15 03/09 Operation Section 4-24©2009 Alamo Group Inc.OPERATIONInspect the Blades daily for abnormal wear. REPLACE BOTH BLADES on that

OPERATIONEAGLE 15 03/09 Operation Section 4-25©2009 Alamo Group Inc.OPERATION9.4 Blade Bolt InspectionInspect Blade Bolt Head daily for wear as foll

SAFETYEAGLE 15 03/09 Safety Section 1-6©2009 Alamo Group Inc.SAFETYEquipment Operation Safety Instructions and PracticesRepeated or substantial brea

OPERATIONEAGLE 15 03/09 Operation Section 4-26©2009 Alamo Group Inc.OPERATIONRotary Mower PRE-OPERATION InspectionMower ID#________________ Make ___

OPERATIONEAGLE 15 03/09 Operation Section 4-27©2009 Alamo Group Inc.OPERATIONTractor PRE-OPERATION InspectionMower ID#________________ Make ________

OPERATIONEAGLE 15 03/09 Operation Section 4-28©2009 Alamo Group Inc.OPERATION10. DRIVING THE TRACTOR AND IMPLEMENTSafe tractor transport requires th

OPERATIONEAGLE 15 03/09 Operation Section 4-29©2009 Alamo Group Inc.OPERATION10.1 Starting the TractorThe procedure to start the tractor is model sp

OPERATIONEAGLE 15 03/09 Operation Section 4-30©2009 Alamo Group Inc.OPERATIONTransport PositionTo raise mower wings, drive the unit to a level areaa

OPERATIONEAGLE 15 03/09 Operation Section 4-31©2009 Alamo Group Inc.OPERATION10.4 Driving the Tractor and CutterStart off driving at a slow speed an

OPERATIONEAGLE 15 03/09 Operation Section 4-32©2009 Alamo Group Inc.OPERATION10.5 Crossing Ditches and Steep InclinesWhen crossing ditches with stee

OPERATIONEAGLE 15 03/09 Operation Section 4-33©2009 Alamo Group Inc.OPERATIONInclines and ditches should be approached along aline which is at an an

OPERATIONEAGLE 15 03/09 Operation Section 4-34©2009 Alamo Group Inc.OPERATIONMany varied objects, such as wire, cable, rope, or chains, can become e

OPERATIONEAGLE 15 03/09 Operation Section 4-35©2009 Alamo Group Inc.OPERATIONRotary Mowers are capable under adverse conditions of throwingobjects f

SAFETYEAGLE 15 03/09 Safety Section 1-7©2009 Alamo Group Inc.SAFETYOperate this Equipment only with a Tractor equipped with an approved roll-over-pr

OPERATIONEAGLE 15 03/09 Operation Section 4-36©2009 Alamo Group Inc.OPERATION11.4 PTO RPM and Ground SpeedGround speed for mowing will depend upon t

OPERATIONEAGLE 15 03/09 Operation Section 4-37©2009 Alamo Group Inc.OPERATIONDo not mow with two machines in the same area except with Cab tractors

OPERATIONEAGLE 15 03/09 Operation Section 4-38©2009 Alamo Group Inc.OPERATIONWhen you get to the end of a pass, slightly raise themower (2-4”) befor

OPERATIONEAGLE 15 03/09 Operation Section 4-39©2009 Alamo Group Inc.OPERATIONWhen mowing across uneven areas such as road shoulders, ditch edges, an

OPERATIONEAGLE 15 03/09 Operation Section 4-40©2009 Alamo Group Inc.OPERATION11.6 Shutting Down the ImplementTo shut down attached mower head, first

OPERATIONEAGLE 15 03/09 Operation Section 4-41©2009 Alamo Group Inc.OPERATIONNever unhitch without using the Tongue Jack. The Tongue is very heavy.

OPERATIONEAGLE 15 03/09 Operation Section 4-42©2009 Alamo Group Inc.OPERATION13. MOWER STORAGEIt is recommended that the mower be stored with the ce

OPERATIONEAGLE 15 03/09 Operation Section 4-43©2009 Alamo Group Inc.OPERATIONNever allow children or other persons to ride on the Tractor or Impleme

OPERATIONEAGLE 15 03/09 Operation Section 4-44©2009 Alamo Group Inc.OPERATION14.1 Tire and WheelsLaminated Sectional Tires are designed for conditio

OPERATIONEAGLE 15 03/09 Operation Section 4-45©2009 Alamo Group Inc.OPERATIONNever allow children or other persons to ride on the Tractor or Impleme

SAFETYEAGLE 15 03/09 Safety Section 1-8©2009 Alamo Group Inc.SAFETYDo not operate this Equipment with hydraulic oil or fuel leaking. Oiland fuel ar

OPERATIONEAGLE 15 03/09 Operation Section 4-46©2009 Alamo Group Inc.OPERATIONWhen operating on public roads, haveconsideration for other road users.

OPERATIONEAGLE 15 03/09 Operation Section 4-47©2009 Alamo Group Inc.OPERATIONUse adequately sized and rated trailers andequipment to transport the t

OPERATIONEAGLE 15 03/09 Operation Section 4-48©2009 Alamo Group Inc.OPERATION15. TROUBLE SHOOTING GUIDEProblem Possible Cause RemedyExcessive Vibrat

OPERATIONEAGLE 15 03/09 Operation Section 4-49©2009 Alamo Group Inc.OPERATIONGearbox Noisy Rough gears. Run in or change gears.Worn bearing. Replac

OPERATIONEAGLE 15 03/09 Operation Section 4-50©2009 Alamo Group Inc.OPERATIONOil Squirting from Breather Oil leaking by piston ring. Do not carry c

Maintenance Section 5-1©2009 Alamo Group Inc.MAINTENANCE SECTION

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-2©2009 Alamo Group Inc.MAINTENANCEBefore operating your Rotary Cutter, make sure it is properly lubr

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-3©2009 Alamo Group Inc.MAINTENANCE

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-4©2009 Alamo Group Inc.MAINTENANCEWHEEL HUB ASSEMBLYThe Wheel Hub Assemblies need to be lubricatedon

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-5©2009 Alamo Group Inc.MAINTENANCECENTER & WING GEARBOXESThe Gearboxes have been filled with lub

SAFETYEAGLE 15 03/09 Safety Section 1-9©2009 Alamo Group Inc.SAFETYThere are obvious and hidden potential hazards in the operation of thisMower. RE

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-6©2009 Alamo Group Inc.MAINTENANCEDRIVELINESThe Drivelines and U-Joints should be inspected each mor

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-7©2009 Alamo Group Inc.MAINTENANCEMAIN CV DRIVELINE SAFETY SHIELDTo remove the outer CV cone, remove

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-8©2009 Alamo Group Inc.MAINTENANCECAT IV WING DRIVELINE SHIELDSTo remove the main inner driveline sh

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-9©2009 Alamo Group Inc.MAINTENANCEWING DRIVELINE CAT VFigure MntP-R-0011) Remove the two shieldbeari

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-10©2009 Alamo Group Inc.MAINTENANCEFigure MntP-R-0014) Grease and install the sleevebaring in groove

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-11©2009 Alamo Group Inc.MAINTENANCETO DISASSEMBLE UNIVERSAL JOINT1. Remove all snap rings.2. Positio

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-12©2009 Alamo Group Inc.MAINTENANCETO REASSEMBLE UNIVERSAL JOINT1. Smear grease into bearings and ch

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-13©2009 Alamo Group Inc.MAINTENANCE5. Drive cup down with spacer and insert snap ring6. To loosen cr

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-14©2009 Alamo Group Inc.MAINTENANCEBLADE SERVICINGInspect blades before each use to determine that t

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-15©2009 Alamo Group Inc.MAINTENANCEBLADE SHARPENINGAlways sharpen both blades at same time to mainta

SAFETYEAGLE 15 03/09 Safety Section 1-10©2009 Alamo Group Inc.SAFETYFollow these guidelines to reduce the risk of equipment and grass fireswhile ope

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-16©2009 Alamo Group Inc.MAINTENANCEBLADE CARRIER REMOVALRemove cotter pin and loosen slotted nut on

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-17©2009 Alamo Group Inc.MAINTENANCEBLADE CARRIER INSTALLATIONClean the splines on both the blade car

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-18©2009 Alamo Group Inc.MAINTENANCESEASONAL CLUTCH MAINTENANCEIt is important that the clutches slip

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-19©2009 Alamo Group Inc.MAINTENANCESTORAGEYour rotary cutter represents an investment from which you

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-20©2009 Alamo Group Inc.MAINTENANCEGearbox Tools For Disassembly and Assembly1. Caulking Gun w/Silic

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-21©2009 Alamo Group Inc.MAINTENANCEDISASSEMBLY OF DIVIDER GEARBOX (Trained Dealer Personnel Only)STE

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-22©2009 Alamo Group Inc.MAINTENANCESTEP 3 Laying the Hub Assembly on its side, tap the Gear end of t

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-23©2009 Alamo Group Inc.MAINTENANCESTEP 6The Input Gear and Bearing can be removed from the Input Sh

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-24©2009 Alamo Group Inc.MAINTENANCEAssembly of Power DividerSTEP 1Install the Bearing Race into the

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-25©2009 Alamo Group Inc.MAINTENANCEloosened. Repeat this process until the Shaft no longer becomes l

SAFETYEAGLE 15 03/09 Safety Section 1-11©2009 Alamo Group Inc.SAFETYRotary Mowers are capable under adverse conditions of throwingobjects for great

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-26©2009 Alamo Group Inc.MAINTENANCESTEP 5Install the Bearing Race into the Main Gearbox Housing.STEP

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-27©2009 Alamo Group Inc.MAINTENANCESTEP 7Install the Shaft Assembly into the Main Housing. FIGURE Mn

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-28©2009 Alamo Group Inc.MAINTENANCESTEP 9After Gear adjustment is complete the Input Cap and the Gas

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-29©2009 Alamo Group Inc.MAINTENANCESTEP 11Install the second Hub Cap assembly on the Main Housing. C

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-30©2009 Alamo Group Inc.MAINTENANCETEM QTY DESCRIPTION1. 1 Housing2. 18 Lockwasher3. 12 Hex Head Bol

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-31©2009 Alamo Group Inc.MAINTENANCERIGHT ANGLE GEARBOX (OUTBOARD) ASSEMBLY & DISASSEMBLY PROCEDU

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-32©2009 Alamo Group Inc.MAINTENANCEStep V.From the bottom of Main Housing drive out top Bearing Cup

MAINTENANCEEAGLE 15 03/09 Maintenance Section 5-33©2009 Alamo Group Inc.MAINTENANCESTEP Iinsert short and long spacer (29 & 24) in proper locati

ALAMO-INDUSTRIAL LIMITED WARRANTY1. LIMITED WARRANTIES1.01. Alamo Industrial warrants for one year from the purchase date to the original non-commer

To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions andthe Safety Messages in this Manual.

SAFETYEAGLE 15 03/09 Safety Section 1-12©2009 Alamo Group Inc.SAFETYConnecting or Disconnecting Implement Safety Instructions and PracticesDO NOT us

EAGLE 10/15 - SOM 3/09Printed in USAP/N 00780567C

SAFETYEAGLE 15 03/09 Safety Section 1-13©2009 Alamo Group Inc.SAFETYTransporting Safety Instructions and PracticesBe particularly careful when trans

To the Owner/Operator/DealerAll implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-mindedoperator wh

SAFETYEAGLE 15 03/09 Safety Section 1-14©2009 Alamo Group Inc.SAFETYTransport only at speeds where you can maintain control of theequipment. Serious

SAFETYEAGLE 15 03/09 Safety Section 1-15©2009 Alamo Group Inc.SAFETYMaintenance and Service Safety Instructions and PracticesSecure the Implement fo

SAFETYEAGLE 15 03/09 Safety Section 1-16©2009 Alamo Group Inc.SAFETYDo not modify or alter this Implement. Do not permit anyone to modify or alter

SAFETYEAGLE 15 03/09 Safety Section 1-17©2009 Alamo Group Inc.SAFETYStorage and Parking Safety Instructions and PracticesConcluding Safety Instructi

SAFETYEAGLE 15 03/09 Safety Section 1-18©2009 Alamo Group Inc.SAFETYDecal LocationNOTE: Alamo Industrial supplies safety decals on this product to

SAFETYEAGLE 15 03/09 Safety Section 1-19©2009 Alamo Group Inc.SAFETYITEM PART NO. QTY TYPE DESCRIPTION1. 00725746 1 PELIGRO Get Manual Translated2

SAFETYEAGLE 15 03/09 Safety Section 1-20©2009 Alamo Group Inc.SAFETYDecal DescriptionPeligro Translation, If you do not know how to readEnglish, ple

SAFETYEAGLE 15 03/09 Safety Section 1-21©2009 Alamo Group Inc.SAFETYWARNING! Maintain shields and deflectors ingood condition. Failure to do so may

SAFETYEAGLE 15 03/09 Safety Section 1-22©2009 Alamo Group Inc.SAFETYDANGER! Make certain that drivelines are correctlength and are securely attached

SAFETYEAGLE 15 03/09 Safety Section 1-23©2009 Alamo Group Inc.SAFETYMulti Hazard Decal Sheet P/N 00749117

Table Of ContentsSAFETY SECTION ...1-1Gener

SAFETYEAGLE 15 03/09 Safety Section 1-24©2009 Alamo Group Inc.SAFETYDANGER! Keep everyone clear when lifting,folding, and working under raised compo

SAFETYEAGLE 15 03/09 Safety Section 1-25©2009 Alamo Group Inc.SAFETYRed Reflector. Keep reflectors clean and visible.P/N 1458392Amber Reflector. Ke

SAFETYEAGLE 15 03/09 Safety Section 1-26©2009 Alamo Group Inc.SAFETYBlade Rotation Counter Clockwise.P/N D137Blade Rotation Clockwise.P/N D138NAME L

SAFETYEAGLE 15 03/09 Safety Section 1-27©2009 Alamo Group Inc.SAFETYWARNING! DO NOT transport at speeds higherthan 20 mph. Only transport behind a

SAFETYEAGLE 15 03/09 Safety Section 1-28©2009 Alamo Group Inc.SAFETYRead Operator’s Manual! The operator’s manual islocated inside this canister. I

SAFETYEAGLE 15 03/09 Safety Section 1-29©2009 Alamo Group Inc.SAFETYFederal Laws and RegulationsThis section is intended to explain in broad terms t

Brake and Differential Lock Setting ...

In order to reduce accidents and enhance the safe operation of mowers, Alamo Industrial, in cooperationwith other industry manufacturers has developed

Alamo Industrial Division is willing to provideone (1) AEM Mower Safety Practices VideoPlease Send Me: VHS Format – AEM/FEMA Mower Operator Safety Vid

Safety Section 1-1©2009 Alamo Group Inc.SAFETY SECTION

SAFETYEAGLE 15 03/09 Safety Section 1-2©2009 Alamo Group Inc.SAFETYGeneral Safety Instructions and PracticesA careful operator is the best operator.

Introduction Section 2-1©2009 Alamo Group Inc.INTRODUCTION SECTION

INTRODUCTIONEAGLE 15 03/09 Introduction Section 2-2©2009 Alamo Group Inc.INTRODUCTIONThis Rotary Cutter is designed with care and built with qualit

INTRODUCTIONEAGLE 15 03/09 Introduction Section 2-3©2009 Alamo Group Inc.INTRODUCTIONYour medium-duty Cutter is designed primarily for weed, grass

INTRODUCTIONEAGLE 15 03/09 Introduction Section 2-4©2009 Alamo Group Inc.INTRODUCTIONAttention Owner/OperatorBEFORE OPERATING THIS MACHINE:1. Care

Assembly Section 3-1©2009 Alamo Group Inc.ASSEMBLY SECTION

ASSEMBLYEAGLE 15 02/08 Assembly Section 3-2©2009 Alamo Group Inc.ASSEMBLYDEALER SET-UP INSTRUCTIONSThe mower as received from the factory is virtual

ASSEMBLYEAGLE 15 02/08 Assembly Section 3-3©2009 Alamo Group Inc.ASSEMBLY2. Make sure the tractor PTO is the correct speed and shaft size for the im

ASSEMBLYEAGLE 15 02/08 Assembly Section 3-4©2009 Alamo Group Inc.ASSEMBLY9. Make sure the wing Transport Bars/Latches arelocked in the position to h

ASSEMBLYEAGLE 15 02/08 Assembly Section 3-5©2009 Alamo Group Inc.ASSEMBLYKeep coworkers and bystanders away from the implement while filling.13. Con

SAFETYEAGLE 15 03/09 Safety Section 1-3©2009 Alamo Group Inc.SAFETYOperator Safety Instructions and PracticesEngine Exhaust, some of its constituent

ASSEMBLYEAGLE 15 02/08 Assembly Section 3-6©2009 Alamo Group Inc.ASSEMBLYthe possibility of back injuries.1. Remove taper pin from main driveline im

ASSEMBLYEAGLE 15 02/08 Assembly Section 3-7©2009 Alamo Group Inc.ASSEMBLYimplement tires to manufacturer rated PSI as shown on the tire sidewall.

ASSEMBLYEAGLE 15 02/08 Assembly Section 3-8©2009 Alamo Group Inc.ASSEMBLYLubricate the PTO drivelines and wheel hubs according to the lubrication in

ASSEMBLYEAGLE 15 02/08 Assembly Section 3-9©2009 Alamo Group Inc.ASSEMBLYDriveline Clamp Cone Yoke Operating InstructionsLoosen the yoke clamp cone

Operation Section 4-1©2009 Alamo Group Inc.OPERATION SECTION

OPERATIONEAGLE 15 03/09 Operation Section 4-2©2009 Alamo Group Inc.OPERATIONEAGLE 10/ 15 ROTARY MOWER OPERATION INSTRUCTIONSAlamo Industrial EAGLE 1

OPERATIONEAGLE 15 03/09 Operation Section 4-3©2009 Alamo Group Inc.OPERATION1. Standard Equipment and SpecificationsEAGLE 10 EAGLE 15Cutting Width 1

OPERATIONEAGLE 15 03/09 Operation Section 4-4©2009 Alamo Group Inc.OPERATION2. OPERATOR REQUIREMENTSSafe operation of the unit is the responsibility

OPERATIONEAGLE 15 03/09 Operation Section 4-5©2009 Alamo Group Inc.OPERATION3. TRACTOR REQUIREMENTSThe tractor used to operate the mower must have t