Alamo RHINO TX235 User Manual download pdf (Page 86)

ASSEMBLY

TX235 02/07 Assembly Section 3-2

ASSEMBLY

Operating with PTO speed over 540 RPM can cause excessive vibration with subsequent

machine failure which can cause serious injury or even death. Never exceed 600 RPM.

DEALER SET-UP INSTRUCTIONS

Assembly of this mower is the responsibility of the Rhino dealer. The mower should be delivered to the owner

completely assembled, lubricated, and adjusted for normal cutting conditions.

Set up mower as received from the factory with these instructions. Mower is shipped in bundles. Open parts

box and lay parts out to make location easy. Refer to parts list and exploded view drawings for more detail.

This mower is shipped partially assembled. Assembly will be easier if components are aligned and loosely

assembled before tightening hardware.

Always use personal protection devices such as eye and ear protectors during assembly.

TONGUE JACK AND WHEEL ATTACHMENT

Attach the Jack to the Tongue and retain with Pin. Asm-R-0321. Attach the tires to the hubs with lug bolts

provided. Asm-R-0322.

NOTE: Install tires with Valve

Stems toward outside of frame.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 149 150

No comments

Alamo RHINO TX235 User Manual Page 86