Alamo 60C Operator's Operator's Manual download pdf (Page 51)

2.4 3-Point Hitch

The tractor 3-point hitch must be rated to lift at least,

1025 lbs (BH25), 1160 lbs (BH26), and 1540 lbs

(BH27). These models are designed to be mounted

on a tractor CAT I or CAT II (BH25 & BH26) CAT II or

CAT III (BH27) 3-Point or Quick Hitch.

Refer to the tractor operator’s manual for the

category of the tractor being used. If the hitch does

not conform to ASABE CAT I, CAT II or CAT III

dimensions, the mower may not fit or raise properly.

Consult an authorized dealer for possible modifica-

tion procedures to mount non-conforming hitches.

Depending on the hitch category, certain size pins

are used to attach the mower to the tractor. CAT I

hitches require 7/8” lower and 3/4” upper diameter

hitch pins. Quick Hitch requires 1-7/16” diameter

lower pin and 1-1/4” diameter upper pin.

Our 3-Point Quick Hitch is designed to connect to a

Quick-Attach coupler making mounting and

dismounting your mower easier. The 3-Point Quick

Hitch is also designed to connect the mower to a

tractor’s 3-point linkage without the use of a Quick-

Attach Coupler.

BH20 Series 04/13

Operation Section 4-5

! DANGER

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 137 138

No comments

Alamo 60C Operator's Operator's Manual Page 51